Army Technical Syllabus

दोस्तों आपका become Agniveer पर स्वागत है, आपको बता दे कि यह वेबसाइट आर्मी से जुड़ी तमाम भर्तियों के अपडेट के लिए समर्पित है। आज के artical में हम Army Technical Syllabus के बारे में विस्तार से जानकारी देंगे।

जैसा कि आप को पता है कि आजकल इंडियन आर्मी में भर्ती Army Technical Syllabus ‘अग्निपथ योजना’ के तहत के तहत की जा रही है। Army Agniveer Bharti 2024 में भर्ती होने वाले उम्मीदवारों को 4 साल के लिए देश सेवा का मिलेगा।

आर्मी टेक्निकल सिलेबस

Army Technical Syllabus में Agniveer Technical के Syllabus के बारे में विस्तार से जानकारी दी गई है। इसलिए इस आर्टिकल को ध्यानपूर्वक पढ़े।
Army Technical Syllabus को पढ़ने के बाद ही आप अपनी तैयारी अच्छे से कर पाएंगे, क्योंकि आपको पता होना चाहिए कि सिलेक्शन ज्यादा पढ़ाई करने से नहीं होता है बल्कि सिलेक्शन इससे होता है कि आपको क्या पढ़ना हैं और क्या नहीं पढ़ना हैं।

और अगर आप Army Technical की सच में ही तैयारी कर रहे हैं तो आपको Army Technical Syllabus का मालूम अवश्य होना चाहिए जिससे आपको पता लगेगा कि मेरे सिलेबस में कोनसा टॉपिक है और कौनसा टॉपिक नहीं है, क्या टॉपिक मुझे पढ़ना हैं और क्या टॉपिक मुझे छोड़ना हैं।
Army Technical Syllabus के इस लेख मे नीचे syllabus, Exam Pattern और प्रत्येक पेपर विषय टॉपिक को विस्तार से बताया है।

Army Technical Syllabus 2024 & Exam Pattern

Army Agniveer Technical Exam Pattern के बारे में यहां बताया गया है जिसे आप ध्यानपूर्वक पढ़ सकते हैं –
• Army Technical की परीक्षा में कुल 50 प्रश्न पूछे जाएंगे।
• सही जवाब देने पर प्रति प्रश्न आपको 2 अंक दिए जाएंगे।
• गलत जवाब देने पर 1 अंक काट लिया जाएगा।
• प्रश्न पत्र हल करने के लिए आपको अधिकतम 60 मिनट का समय दिया जाएगा।
• न्यूनतम पासिंग मार्क सीमा 40 अंक की हैं।
• Army Technical Syllabus में चार विषयों से संबंधित प्रश्न पूछे जाएंगे – General Knowledge, Maths,Physics और Chemistry आदि।

Army Technical Syllabus PDF

यदि आप Army Technical Syllabus PDF को डाउनलोड करना चाहते हैं तो नीचे दिए गए लिंक पर क्लिक करके पढ़ सकते हैं और ये PDF आप indian army Official website https://joinndidanarmy.nic.in पर जाकर भी देख सकते हैं।

Army Technical Syllabus

Army GD Syllabus इस प्रकार हैं –

(A) Army Technical General Knowledge Syllabus

• राष्ट्रीय और अंतरराष्ट्रीय स्तर के संक्षिप्त नाम
• राष्ट्रीय और अंतरराष्ट्रीय स्तर के खेल
• अवार्ड और प्राइज – राष्ट्रीय पुरस्कार, वीरता पुरस्कार, नोबेल पुरस्कार
• इतिहास – भारत और वैश्विक इतिहास की महत्त्वपूर्ण तिथियां और युद्ध, राष्ट्रीय आंदोलन और भारतीय इतिहास की प्रमुख घटनाएं ।
• भूगोल – सौर मंडल, अंतरिक्ष के आविष्कार, पृथ्वी की प्रमुख चोटियां, रेगिस्तान, नदियां, झीलें और प्रसिद्ध झरने। और भौगोलिक दृष्टि से जुड़े सबसे बड़े और सबसे छोटे से संबंधित प्रश्न।
• शब्दावली – भौगोलिक शब्द, इकोनॉमी शब्द, खगोलीय शब्द, कानूनी शब्द और Misc Terms ।
• अन्य – संयुक्त राष्ट्र संघ, भारतीय सशस्त्र बल, भारतीय कस्बे, राज्य और केन्द्र शासित प्रदेश ।
• संस्थान और अनुसंधान स्टेशन, अंतर्राष्ट्रीय स्पेस स्टेशन।

• भारत और विश्व के त्योहार
• भारतीय समाचार एजेंसी और दैनिक समाचार।
• महाद्वीप और उपमहाद्वीप
• आविष्कार और खोज
• पर्यावरण
• भारत का संविधान
• धार्मिक समुदाय और प्रमुख भाषाएं
• राष्ट्रीय और अंतर्राष्ट्रीय दिवस
• पुस्तकें और लेखक
• पेड़ पौधे और जानवर
• करेंट अफेयर्स
• कौन क्या है से संबंधित प्रश्न।

ये भी पढ़े – आर्मी अग्निवीर जीडी सिलेबस

(B) Army Technical Physics Syllabus

• Matter – Physical measurements, scalar and vector quantities. Simple machines,
  structure of matter.
• Motion – Motion and displacement , uniform and non-uniform motion, speed and velocity,
  acceleration, equations of motion-derivation and simple numerical.
• Force – Meaning of force, inertia of a body, Newton’s laws of motion, momentum,
  relationship between forces, acceleration and mass of an object-simple numerical based
  on these.
• Gravitation – Newton’s law of gravitation, free-fall and acceleration due to gravity, simple Pendulum and restoring force, relationship between length and time period.
• Work and Energy – Energy, mechanical energy – potential and kinetic – their formulae, concept of work, work done by a constant force, relation between work and energy, simple numerical on work and energy.
• Light – Reflection, law of reflection, refraction, law of refraction, refraction through prisms, lenses and optical instruments, simple and compound microscope.
• Heat – Heat as a form of energy, mechanical work and heat, heat and temperature,
  measurement of temperature, idea of Celsius and Fahrenheit scales and their conversion,
  specific heat, simple numerical based on it. Idea of conversion of heat into work and vice-
  versa, meaning of mechanical equivalent of heat – its determination by Joule’s
  experiment. External and internal combustion engine.
• Electricity – A source of energy, conductors and resistors, measurement of current,
  potential difference and resistance – Ohm’s law, simple numerical based on it. heating
  effect of current, quantitative relationship between heat, electric current, resistance of
  common electrical appliances based on heating effect, measurement of electrical energy – its unit, electrical power, simple numerical.
• Magnetism – Type of magnet, properties of magnet, magnetic field, electromagnet and
  their applications, DC & AC motors. Fleming ‘s left hand rule.
• Sound – Sound and its property, propagation of sound, velocity, resonance, wave motion and applications.
• Wave Motion – Nature of a wave, propagation of a wave through a medium, types of waves – longitudinal and transverse, periodic motion, idea of simple harmonic motion (graphical treatment). Definitions of displacement,
• amplitude, frequency, time period, wave length and their units, relationship between wavelength, frequency and velocity of a wave, simple numerical, energy transferred during propagation of waves.
• Domestic electric circuit – Elementary ideas about wiring, fuse, possible hazards and
  safety measures.
• Sun as a Source of energy – Absorption of solar energy by the earth, photosynthesis,
  solar heaters, solar cells; wind energy – wind mills; electricity from sea waves.
• Fuels – Bio mass as a fuel-biogas, fossil fuels-coal, types of coal; petroleum, fractional distillation of petroleum, L.P.G, natural gas, classification of fuels –solid, liquid and gaseous fuels;
• characteristics of fuel-calorific value of fuels and its determination, ignition temperature, combustion of fuels, combustion of food in living organisms; characteristics of an ideal fuel.
• Heat engines – Idea of conversion of heat into work and vice-versa, meaning of
  mechanical equivalent of heat – its determination by joule’s experiment (simple numerical based on work and energy conversion). External combustion engine (basic idea), working of internal combustion engines.
• Nuclear energy – Sources of the Sun’s energy, composition of sunlight; basic idea of
  atomic nucleus, nuclear fusion, nuclear fission, chain reaction, energy released during
  fission, examples of uncontrolled fission and fusion, simple idea of nuclear reactor and
  atomic power plant. Radiation hazards. Energy crisis –causes and possible solution for overcoming it.

(C) Army Technical Math Syllabus

Arithmetic -Natural numbers, integers, fractions, rational/irrational numbers, decimal fractions, HCF & LCM, square root, ratio and proportion, percentages, averages, profit & loss, simple and compound interest.
Algebra – Addition, subtraction, multiplication and division of algebraic expressions, HCF & LCM, factorization, simple equations, surds, indices, logarithms, Solution of linear equations of two and three variables.
Ratio and proportion meaning and standard form, roots and discriminate of a quadratic
equation ax²+ bx + c = 0
Calculus – Elementary and basic problems of different and integral calcus. Basic concept of continuity.

Mensuration
Area and Volume – Area of four walls of a room, area of a circle, sector and segment of a circle; surface area and volume of cube, cuboids cone, cylinder, sphere.
Trigonometry – Trigonometric ratios of an angle A of a right angle triangle, Simple applications of trigonometric ratios for solving problems of different types, Simple identities based upon the above.
Heights and Distances – Solution of simple problems of height and distance using trigonometrically tables and logarithmic tables.
Geometry

Lines and Angles – Different characteristics of lines and angles, parallel and perpendicular lines, inserting lines, some of angles and triangles, interior and exterior angles.
Triangles-properties, equality, congruency and similarity with respect to sides and angles.
Parallelogram -types and properties.
Circles – Properties, arc, chords, tangents, secants and angles subtended by arcs.
Statistics – Histograms with given intervals, classification of data, frequency, frequency polygons, ogives. Mean, median and mode of grouped and ungrouped data, problems related to statistical techniques.
Probability – Basic problems related to probability.
Computing – Introduction to computers : role and use of computers in modern society,
Hardware and software aspects of computers,Knowledge of applications and languages, Flow chart and solutions of problems through problem algorithm.

(D) Army Technical Chemistry Syllabus

Matter-Nature and Behaviour Different types of substances, elements, compounds and their mixtures, Structure of matter. Atomic theory, molecules and atoms; Structure of atom- electrons, protons and neutrons,

Composition of nucleus – atomic number and mass number, Valence electrons and valency.
Preparation and properties of Hydrogen, Oxygen, Nitrogen and Carbon-di-oxide.
Oxidation and Reduction, Acid, bases and salts.

Electrochemical cell – construction of a simple voltaic cell; working of an electrochemical cell; lead storage battery and dry cell.

Classification of elements – Similarities and dissimilarities in the properties of some
elements. Periodic law, periods and groups, gradation of properties of elements along a period and in the groups.

Carbon and its compounds – Introduction, allotropies of carbon and their occurrence,structure, related property and uses. Hydrocarbon and their elementary structure, related property and uses, simple compounds of carbon, hydrogen and oxygen and their uses.

Petroleum products, introductory account of synthetic fibres, plastics, rubber, soaps and detergents.

Extraction of metals – Metals and non-metals; occurrence, general metallurgical
operations for extraction of pure metal, properties of metals and some alloys, uses of metals and non-metals, their compounds.

Chemical bond – Formation of ionic and covalent bonds, important properties of
electrovalent and covalent compounds.

Electrolysis – Movement of ions during electrolysis; relationship between current, time and amount of metal deposited during electrolysis; electroplating.

Natural Resources – Water Water as a natural resources, origin of life in water as medium for the activity of the living, water as solvent, saturated and unsaturated solution,

sea water as habitat of organism, salts from oceans, ocean current, use of water Dependence of man on natural resources – minerals from earth metals and non-metals, use of non metals.
Air Role of atmosphere in protection from radiation, composition of atmosphere, waterand particulate matter in atmosphere, carbon dioxide and its adverse effect on livingorganisms, role of trees, release of carbon dioxide from fossil fuels and automobiles,corrosion of metals,

damage of historical monuments from acidic gases, toxic effects ofmetallic particles, asbestos etc on living organisms carbon monoxide and its ill effects,smog, air pollution noise pollution and its effects on human beings.

सारांश

‘Army Technical Syllabus’ के इस लेख मे हमने Army Agniveer Technical का सिलेबस को विस्तार से बताया है। हमें उम्मीद है कि इस लेख को पढ़कर आप अपनी तैयारी को जरूर मजबूत करेंगे।